Headlight restoration can improve the vision while you are driving at night. However, you will have to spend a considerable amount of money to get it done by a professional service provider. That is where you can think about going through the headlight restoration process on your own. Here is a list of few effective tips, which you can keep in mind to restore your headlights with minimum hassle.
1. See whether the damage is from inside
First of all, you will need to see whether your light damage from the inside or outside. When there is inside damage, you will be able to see condensation that has taken place due to moisture. Before you start your headlight restoration project, you will have to drain out the moisture.
2. Use toothpaste
It is possible for you to use toothpaste to enhance the clarity of your headlights. You just need to use a small amount of toothpaste, but it can deliver amazing results to you. In fact, you will be able to restore the entire headlight with a small drop of toothpaste. You just need to take a small amount of toothpaste to a clean piece of cloth and polish the lens from the outside. If your headlight does not get polished by hand, you may have to sand it to remove the oxidation.
3.Using headlight deoxidizer
Headlights on most newer vehicles are made with plastic. As a result, your headlamps become discolored and hazy over time. UV rays, debris, and pollutants can be considered the main culprit. In fact, they can cause oxidization in your headlights. Therefore, you can consider using a headlight deoxidizer to eliminate oxidation from your headlights, which can instantly improve the night vision and improve the appearance of your car.
4. Sand the headlights
Sanding the headlights can be considered another important aspect of the headlight restoration project. However, you need to be careful when sanding to make sure that you do not damage it. If you use this method, then you will need to apply a clear coat or polish the lens afterward.
5. Apply rubbing compound
Last but not least, you can use rubbing compound on the headlights. Once applied, then you will have to use a buffing pad to make the headlights clear. While buffing, you will be able to see how your headlights are restored to a crystal clear finish.